Show Flow Interface - Cisco Catalyst 3650 series Command Reference Manual
Cisco ios xe everest 16.5.1a
Hide thumbs
Also See for Catalyst 3650 series:
- Hardware installation manual (126 pages) ,
- Configuration manual (94 pages) ,
- Manual (94 pages)
Table of Contents
Advertisement
show flow interface
show flow interface
To display the Flexible NetFlow configuration and status for an interface, use the show flow interface
command in privileged EXEC mode.
show flow interface [type number]
Syntax Description
type
number
Command Modes
Privileged EXEC
Command History
Release
Cisco IOS XE 3.3SE
Examples
The following example displays the Flexible NetFlow accounting configuration on Ethernet interfaces 0/0
and 0/1:
Device# show flow interface gigabitethernet1/0/1
Interface Ethernet1/0
Device# show flow interface gigabitethernet1/0/2
Interface Ethernet0/0
The table below describes the significant fields shown in the display.
Table 24: show flow interface Field Descriptions
Field
Interface
monitor
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
464
(Optional) The type of interface on which you want to display Flexible NetFlow
accounting configuration information.
(Optional) The number of the interface on which you want to display Flexible
NetFlow accounting configuration information.
monitor:
FLOW-MONITOR-1
direction:
Output
traffic(ip):
on
monitor:
FLOW-MONITOR-1
direction:
Input
traffic(ip):
sampler SAMPLER-2#
Modification
This command was introduced.
Description
The interface to which the information applies.
The name of the flow monitor that is configured on
the interface.
Advertisement
Table of Contents
