Boot Manual - Cisco Catalyst 3650 series Command Reference Manual
Cisco ios xe everest 16.5.1a
Hide thumbs
Also See for Catalyst 3650 series:
- Hardware installation manual (126 pages) ,
- Configuration manual (94 pages) ,
- Manual (94 pages)
Table of Contents
Advertisement
boot manual
To configure manual boot, use the boot manual command in global configuration mode. To remove the
configuration, use the no form of this command.
boot manual switch switch-number
no boot manual switch switch-number
Syntax Description
switch swtich-number
Command Default
Manual boot is enabled.
Command Modes
Global configuration (config)
Command History
Release
Cisco IOS XE Denali 16.3.2
Usage Guidelines
When manual boot is disabled, and the switch reloads, the boot process starts automatically. When manual
boot is disabled, the bootloader determines whether to execute a device boot or a network boot based on the
configured value of the iPXE ROMMON variable.
Examples
The following example shows how to configure manual boot for switch 2:
Device(config)# boot manual switch 2
Configures manual boot for the switches in the stack.
Modification
This command was introduced.
Command Reference, Cisco IOS XE Everest 16.5.1a (Catalyst 3650 Switches)
boot manual
573
Advertisement
Table of Contents
