Offloading Service-Policy On Bundle Access Port - Cisco ASR 9000 Series Configuration Manual
Aggregation services router modular quality of service
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
Offloading Service-policy on Bundle Access Port
Command or Action
Step 10
interface type interface-path-id
Example:
RP/0/RSP0/CPU0:router(config)# interface
gigabitethernet 100/0/0/0
Step 11
l2transport
Example:
RP/0/RSP0/CPU0:router(config-if)# l2transport
Step 12
nv
Example:
RP/0/RSP0/CPU0:router(config-if)# nv
Step 13
service-policy input policy-map
Example:
RP/0/RSP0/CPU0:router(config-if-nV)#
service-policy input policy1
Step 14
commit
Offloading Service-policy on Bundle Access Port
Perform these tasks to offload the service-policy on the bundle access port. This procedure offloads the
service-policy in the ingress direction of the Satellite Ethernet interface.
Cisco ASR 9000 Series Aggregation Services Router Modular Quality of Service Configuration Guide, Release
6.1.x
284
Configuring QoS on the Satellite System
Purpose
Configures an interface and enters the interface configuration
mode.
(Optional)
Configures the L2 transport offload for satellite.
Enters the satellite network virtualization (nV) configuration
submode.
Attaches a policy map to an input interface to be used as the
service policy for that interface.
Advertisement
Chapters
Table of Contents
