Feature History And Information For Configuring Dynamic Interfaces - Cisco WLC 5700 Series Interface Configuration Manual
Cisco ios xe release 3e
Hide thumbs
Also See for WLC 5700 Series:
- Command reference manual (82 pages) ,
- Command reference manual (52 pages)
Table of Contents
Advertisement
Configuring Dynamic Interfaces
SUMMARY STEPS
1. show VLAN
2. show int VLAN
3. configure terminal
4. wlan wlan-name wlan-ID wlan-SSID
5. client vlan vlan-name
6. show vlan
7. end
8. Show WLAN summary
DETAILED STEPS
Command or Action
Step 1
show VLAN
Step 2
show int VLAN
Step 3
configure terminal
Step 4
wlan wlan-name wlan-ID wlan-SSID
Step 5
client vlan vlan-name
Step 6
show vlan
Step 7
end
Step 8
Show WLAN summary
Feature History and Information For Configuring Dynamic
Interfaces
Command History
Release
Cisco IOS XE 3.2SE
OL-32314-01
Feature History and Information For Configuring Dynamic Interfaces
Purpose
Displays all the VLANs.
Displays all the VLAN interfaces.
Enters global configuration mode.
Configures the WLAN.
Configures the client VLAN.
Displays all the VLANs in the WLAN.
Exit configuration mode.
Displays a summary of all the configured VLANs.
Interface Configuration Guide, Cisco IOS XE Release 3E (Cisco WLC 5700 Series)
Modification
This command was introduced.
57
Advertisement
Table of Contents
