Table of Contents
Advertisement
2.
Configure the IP packet transfer setting in the CPU module 1.
Project window
3.
Set the routing parameters in the CPU module 1.
Project window
button
4.
Set the IP address in the master station (station number 0).
Project window
5.
Write the set parameters to the CPU module 1. Then reset the CPU module 1 or power off and on
the system.
[Online]
[Write to PLC]
[Parameter]
[PLC Parameter]
button
[Parameter]
[Network Parameter]
[Parameter]
[Network Parameter]
button
RESET
or Power OFF
CHAPTER 8 FUNCTIONS
"Built-in Ethernet Port Setting"
[Ethernet/CC IE/MELSECNET]
[Ethernet/CC IE/MELSECNET]
ON
8
163
Advertisement
Table of Contents
Troubleshooting
