10.10
Z.RECVS (Receiving Data from the Programmable
Controller on Another Station)
This instruction reads the data received from the programmable controller on another station. (For interrupt programs)
Z.RECVS
Internal device
Setting
(System, user)
1
data*
Bit
Word
(S1)
(D1)
(D2)
*1
Local devices and file registers set for each program cannot be used.
(1) Setting data
Setting data
"Un"/Un
(S1)
(D1)
(D2)
Start contact
Link direct device
File
J\
register
R, ZR
Bit
Word
Description
Start I/O number of the master/local module of the own station
(00 to FE
: Upper two digits of the I/O number expressed in three
H
digits)
Start device of the own station where control data is stored
Start device of own station where received data is stored
(A continuous area for the received data length is required.)
Dummy
CHAPTER 10 DEDICATED INSTRUCTIONS
Un
or
Z.RECVS
"
"
Un
Available devices
Intelligent
function module
device
U\G
(S1)
(D1)
(D2)
Index
Constant
register
Others
Zn
K, H
$
Set by
Data type
String/
16-bit binary
User
Device name
System
Bit
10
301