Configure Link Group Interface - Cisco ASR 9000 Series Configuration Manual
Aggregation services router
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
ISIS Link Group
IPv4 Unicast Topology:
IPv4 Address Family:
LSP transmit timer expires in 0 ms
LSP transmission is idle
Can send up to 9 back-to-back LSPs in the next 0 ms
Configure Link Group Interface
Perform this task to configure link group under Intermediate System-to-Intermediate System (IS-IS) interface
and address-family sub-mode:
One IS-IS interface and address-family can specify only one link-group association. The default is for
Note
both levels regardless of the current circuit-type. The link-group association can be specified for one level
only if configured.
SUMMARY STEPS
1. configure
2. router isis instance-id
3. interface type interface-path-id
4. address-family ipv4 | ipv6 [ unicast ]
5. link-group link-group-name [ level {1 | 2 } ]
6. commit
7. show isis interface
DETAILED STEPS
Command or Action
Step 1
configure
Step 2
router isis instance-id
Example:
RP/0/RSP0/CPU0:router(config)# router isis purple
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
324
Adjacency Formation:
Prefix Advertisement:
Metric (L1/L2):
Weight (L1/L2):
MPLS Max Label Stack:
MPLS LDP Sync (L1/L2):
Link-Group (L1/L2):
Metric-Offset (L1/L2):100/100
Protocol State:
Forwarding Address(es): 100.5.6.6
Global Prefix(es):
Enabled
Running
Running
110/110
0/0
1
Disabled/Disabled
Configured/Configured
Enabled
Up
100.5.6.0/24
Purpose
Enters IS-IS configuration submode.
Implementing IS-IS
OL-30423-03
Advertisement
Table of Contents
