Configuring Label Distribution Protocol Igp Auto-Configuration For Ospf - Cisco ASR 9000 Series Configuration Manual
Aggregation services router
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
Configuring Label Distribution Protocol IGP Auto-configuration for OSPF
Command or Action
Step 6
multi-area-interface type interface-path-id
Example:
RP/0/RSP0/CPU0:router(config-ospf)#
multi-area-interface Serial 0/1/0/3
Step 7
commit
Configuring Label Distribution Protocol IGP Auto-configuration for OSPF
This task explains how to configure LDP auto-configuration for an OSPF instance.
Optionally, you can configure this feature for an area of an OSPF instance.
SUMMARY STEPS
1. configure
2. router ospf process-name
3. mpls ldp auto-config
4. commit
DETAILED STEPS
Command or Action
Step 1
configure
Step 2
router ospf process-name
Example:
RP/0/RSP0/CPU0:router(config)# router
ospf 1
Step 3
mpls ldp auto-config
Example:
RP/0/RSP0/CPU0:router(config-ospf)# mpls
ldp auto-config
Step 4
commit
Cisco ASR 9000 Series Aggregation Services Router Routing Configuration Guide, Release 5.1.x
402
Purpose
Enables multiple adjacencies for different OSPF areas and
enters multi-area interface configuration mode
Purpose
Enables OSPF routing for the specified routing process and places
the router in router configuration mode.
The process-name argument is any alphanumeric string
Note
no longer than 40 characters.
Enables LDP IGP interface auto-configuration for an OSPF
instance.
• Optionally, this command can be configured for an area of
an OSPF instance.
Implementing OSPF
OL-30423-03
Advertisement
Table of Contents
