Configuring Virtual Terminals; Configuring The Inactive Session Timeout - Cisco Nexus 5500 Series Configuration Manual
Nx-os fundamentals configuration guide,
release 7.x
Hide thumbs
Also See for Nexus 5500 Series:
- Hardware installation manual (142 pages) ,
- Command reference manual (460 pages) ,
- Command reference manual (378 pages)
Table of Contents
Advertisement
Configuring Terminal Settings and Sessions
Command or Action
Step 7
stopbits {1 | 2}
Example:
switch(config-com1)# stopbits 2
Step 8
exit
Example:
switch(config-com1)# exit
switch(config)#
Step 9
show line com1
Example:
switch(config)# show line com1
Step 10
copy running-config startup-config
Example:
switch(config)# copy running-config
startup-config
Configuring Virtual Terminals
This section describes how to configure virtual terminals on Cisco NX-OS devices.
Configuring the Inactive Session Timeout
You can configure a timeout for inactive virtual terminal sessions on a Cisco NX-OS device.
SUMMARY STEPS
1. configure terminal
2. line vty
3. exec-timeout minutes
4. exit
5. (Optional) show running-config all | begin vty
6. (Optional) copy running-config startup-config
OL-30890-01
Purpose
Configures the stop bits. The default is 1.
Exits COM1 configuration mode.
(Optional)
Displays the COM1 port settings.
(Optional)
Copies the running configuration to the startup
configuration.
Cisco Nexus 5500 Series NX-OS Fundamentals Configuration Guide, Release 7.x
Configuring Virtual Terminals
83
Advertisement
Table of Contents
