Upgrade Hw-Module Fpd Command Output: Example; Show Platform Command Output: Example - Cisco NCS 5000 Series Manual
System management configuration guide for cisco ncs 5000 series
routers
Hide thumbs
Also See for NCS 5000 Series:
- Hardware installation manual (72 pages) ,
- Manual (186 pages)
Table of Contents
Advertisement
upgrade hw-module fpd Command Output: Example
----------------------------------------------------------------------------------------------
SPA-1X10GE-L-V2
----------------------------------------------------------------------------------------------
SPA-4XOC3-POS-V2
----------------------------------------------------------------------------------------------
SPA-1X10GE-WL-V2
----------------------------------------------------------------------------------------------
SPA-1XOC3-ATM-V2
----------------------------------------------------------------------------------------------
SPA-2XOC3-ATM-V2
----------------------------------------------------------------------------------------------
SPA-3XOC3-ATM-V2
----------------------------------------------------------------------------------------------
SPA-1XOC12-ATM-V2
----------------------------------------------------------------------------------------------
This example shows the fpd details of the A9K-MOD400-SE:
RP/0/RP0/CPU0:router #
===============================================================================
===============================================================================
Location
============ ======================== ======= ==== ======= ==== =========== ====
0/2/CPU0
--------------------------------------------------------------------------------
In the show fpd package command output, the "subtype" column shows the FPDs that correspond with
Note
each SPA image. To upgrade a specific FPD with the upgrade hw-module fpd command, replace the
fpga-type argument with the appropriate FPD from the "subtype" column, as shown in the following
example:
RP/0/RP0/CPU0:router(admin)# upgrade hw-module fpd fpga2 location 0/3/1 reload
upgrade hw-module fpd Command Output: Example
Use the upgrade hw-module fpd command to upgrade the FPD image on a SPA, SIP or line card.
show platform Command Output: Example
Use the show platform command to verify that the SPA is up and running.
System Management Configuration Guide for Cisco NCS 5000 Series Routers, IOS XR Release 6.2.x
144
SPA FPGA swv1.9
SPA FPGA swv1.0
SPA FPGA swv1.9
SPA FPGA swv1.2
SPA FPGA swv1.2
SPA FPGA swv1.2
SPA FPGA swv1.2
show hw-module fpd location 0/2/CPU0
Existing Field Programmable Devices
Card Type
A9K-MOD400-SE
spa
fpga1
spa
fpga1
spa
fpga1
spa
fpga1
spa
fpga1
spa
fpga1
spa
fpga1
HW
Version Type Subtype Inst
1.0
lc
cbc
lc
rommon
lc
fpga2
lc
fsbl
lc
lnxfw
lc
fpga10
Upgrading FPD
1.09
0.00
1.00
0.00
1.09
0.00
2.02
0.00
2.02
0.00
2.02
0.00
2.02
0.00
Current SW Upg/
Version
Dng?
0
39.05
No
0
8.32
No
0
1.30
Yes
0
1.19
Yes
0
1.20
Yes
0
1.17
No
0.0
0.5
0.0
0.0
0.0
0.0
0.0
Hide quick links:
Advertisement
Table of Contents
