Configuration Examples For Mpls Multilink Ppp Support; Sample Mpls Multilink Ppp Support Configurations; Example: Configuring Multilink Ppp On An Mpls Csc Pe Device - Cisco ASR 900 Series Manual
Mpls basic configuration guide, cisco ios xe everest 16.5.1
Hide thumbs
Also See for ASR 900 Series:
- Release notes (310 pages) ,
- Configuration manual (172 pages) ,
- Configuration manual (142 pages)
Table of Contents
Advertisement
Configuration Examples for MPLS Multilink PPP Support
Configuration Examples for MPLS Multilink PPP Support
Sample MPLS Multilink PPP Support Configurations
The following examples show sample configurations on a Carrier Supporting Carrier (CSC) network. The
configuration of MLP on an interface is the same for provider edge-to-customer edge (PE-to-CE) links,
PE-to-provider (P) links, and P-to-P links.
Example: Configuring Multilink PPP on an MPLS CSC PE Device
The following example shows how to configure for Multiprotocol Label Switching (MPLS) Carrier Supporting
Carrier (CSC) provider edge (PE) device.
!
mpls label protocol ldp
ip cef
ip vrf vpn2
rd 200:1
route-target export 200:1
route-target import 200:1
!
controller T1 0/0/1
framing esf
clock source internal
linecode b8zs
channel-group 1 timeslots 1-24
!
interface Serial0/0:1
no ip address
encapsulation ppp
ppp multilink
ppp multilink group 1
interface Multilink1
ip vrf forwarding vpn2
ip address 10.35.0.2 255.0.0.0
no peer neighbor-route
load-interval 30
ppp multilink
ppp multilink interleave
ppp multilink group 1
mpls ip
mpls label protocol ldp
!
!
router ospf 200
log-adjacency-changes
auto-cost reference-bandwidth 1000
redistribute connected subnets
passive-interface Multilink1
network 10.0.0.7 0.0.0.0 area 200
network 10.31.0.0 0.255.255.255 area 200
!
!
router bgp 200
no bgp default ipv4-unicast
bgp log-neighbor-changes
neighbor 10.0.0.11 remote-as 200
neighbor 10.0.0.11 update-source Loopback0
!
MPLS Basic Configuration Guide, Cisco IOS XE Everest 16.5.1 (Cisco ASR 900 Series)
60
MPLS Multilink PPP Support
Advertisement
Table of Contents
Troubleshooting
