Appendix 2 Added And Changed Functions - Mitsubishi Electric FX5 User Manual

Melsec iq-f series, ethernet communication

Hide thumbs Also See for FX5:

Programming manual (1112 pages)

User manual (958 pages)

Reference manual (44 pages)

Table Of Contents

100

101

102

103

104

105

106

107

108

109

110

111

112

113

114

115

116

117

118

119

120

121

122

123

124

125

126

127

128

129

130

131

132

133

134

135

136

137

138

139

140

141

142

143

144

145

146

147

148

149

150

151

152

153

154

155

156

157

158

159

160

161

162

163

164

165

166

167

168

169

170

171

172

173

174

175

176

177

178

Table of Contents

Appendix 2

The functions added or changed with the CPU module and engineering tool, and the supported CPU modules' firmware

version and engineering tool software version are given below.

• The firmware version can be confirmed with module diagnosis (CPU diagnosis). Refer to the User's Manual (Hardware) for

the CPU module in use for details on diagnosing the module (CPU diagnosis).

• Refer to the GX Works3 Operating Manual for details on the software version.

Add/Change Function

The file transfer function is supported.

• Automatic detection of connected devices

• Communication setting reflection of Ethernet

device

• Sensor parameter read/write

IP filter function is supported.

MODBUS/TCP communication is supported.

Time setting function (SNTP client) is supported.

Web server function is supported.

During IP address duplication with the device on

the same network, the operation was improved

to output the information of the external device

with duplicated IP address.

*1 Supported with CPU module serial No. 16Y**** and above.

The following file transfer function (FTP server) controls are supported by "1.050" and above.

- Write/delete the file to/from the SD memory card

- Unlock/lock the remote password

- Reset the file password

- Change the setting value of the response monitoring timer

- Allow Online Change

*2 The remote password setting to the FTP server is supported by "1.050" and above.

*3 The response monitoring timer setting/Allow Online Change setting of the file transfer function, and the remote password setting to the

FTP server are supported by "1.035M" and above.

For the setting method of the remote password, refer to GX Works3 Operating Manual.

*4 Refer to the following.

iQ Sensor Solution Reference Manual

*5 Refer to the following.

MELSEC iQ-F FX5 User's Manual (MODBUS Communication)

APPX

170