hit counter script

Mitsubishi Electric FX5 User Manual page 134

Melsec iq-f series, ethernet communication
Hide thumbs Also See for FX5:
Table of Contents

Advertisement

Setting of the security measures for access to the CPU module
The following shows the setting of the security measures for access to the CPU module.
Navigation window[Parameter][FX5UCPU][Module Parameter][Ethernet Port][Application Settings]
[Security]
Item
IP Filter Settings
Disable Direct Connection with MELSOFT
Do Not Respond to CPU Module Search
■IP filter settings
Up to 4 IP addresses can be set as an IP address to be allowed or denied by the IP filter function.
Range specification and specification of the IP addresses to be excluded from the set range are also possible.
Item
Access from IP address below
Range Setting
IP Address
IP Address Excluded from Range
11 SECURITY FUNCTION
132
11.1 IP Filter Function
Description
IP Filter
Set whether to enable the IP filter function.
IP Filter Settings
Set the IP address to be allowed or denied. (Page 132 IP filter
settings)
Set whether to enable or disable direct connection to the engineering
tool.
Select whether to respond to the CPU module search.
Description
Select whether to allow or deny the access from the specified IP addresses.
Select this item when specifying the IP addresses by range.
Set the IP address to be allowed or denied.
When selecting "Range Setting", enter the start IP address (left field) and end IP address
(right field) of the range.
When selecting "Range Setting", set the IP address to be excluded from the set range.
Up to 16 IP addresses can be set.
Setting range
• Not Use
• Use
(Default: Not Use)
• Disable
• Enable
(Default: Enable)
• Do Not Respond
• Respond
(Default: Respond)
Setting range
• Allow
• Deny
(Default: Allow)
(Default: Clear)
0.0.0.1 to 223.255.255.254
(Default: Blank)
0.0.0.1 to 223.255.255.254
(Default: Blank)

Advertisement

Table of Contents
loading

Table of Contents

Save PDF