Table of Contents
Advertisement
Setting the Priority for Adding Prefixes to the RIB
Command or Action
Step 7
address-family { ipv4 | ipv6 } [ unicast ]
Example:
RP/0/RP0/CPU0:router(config-isis-if)#
address-family ipv4 unicast
Step 8
tag tag
Example:
RP/0/RP0/CPU0:router(config-isis-if-af)# tag 3
Step 9
commit
Step 10
show isis [ ipv4 | ipv6 | afi-all ] [ unicast |
safi-all ] route [ detail ]
Example:
RP/0/RP0/CPU0:router(config-isis-if-af)# show isis
ipv4 route detail
Setting the Priority for Adding Prefixes to the RIB
This optional task describes how to set the priority (order) for which specified prefixes are added to the RIB.
The prefixes can be chosen using an access list (ACL), prefix list, or by matching a tag value.
SUMMARY STEPS
1. configure
2. router isis instance-id
3. address-family { ipv4 | ipv6 } [ unicast ]
4. metric-style wide [ transition ] [ level { 1 | 2 }]
5. spf prefix-priority [ level { 1 | 2 }] { critical | high | medium } { access-list-name | tag tag }
6. commit
DETAILED STEPS
Command or Action
Step 1
configure
Step 2
router isis instance-id
Example:
RP/0/RP0/CPU0:router(config)# router isis isp
Step 3
address-family { ipv4 | ipv6 } [ unicast ]
Example:
Routing Configuration Guide for Cisco NCS 6000 Series Routers, IOS XR Release 6.4.x
236
Purpose
Specifies the IPv4 or IPv6 address family, and enters
address family configuration mode.
Sets the value of the tag to associate with the advertised
connected route.
Displays tag information. Verify that all tags are present
in the RIB.
Purpose
Enables IS-IS routing for the specified routing process, and
places the router in router configuration mode. In this
example, the IS-IS instance is called isp.
Specifies the IPv4 or IPv6 address family, and enters router
address family configuration mode.
Implementing IS-IS
Advertisement
Chapters
Table of Contents
