How To Implement Multipoint Layer 2 Services; Configuring A Bridge Domain; Creating A Bridge Domain - Cisco ASR 9000 Series Configuration Manuallines
L2vpn and ethernet services configuration guide
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
Implementing Multipoint Layer 2 Services
How to Implement Multipoint Layer 2 Services
This section describes the tasks that are required to implement Multipoint Layer 2 Services:
Configuring a Bridge Domain
These topics describe how to configure a bridge domain:
Creating a Bridge Domain
Perform this task to create a bridge domain .
SUMMARY STEPS
1. configure
2. l2vpn
3. bridge group bridge-group-name
4. bridge-domain bridge-domain-name
5. Use the commit or end command.
DETAILED STEPS
Step 1
configure
Example:
RP/0/RSP0/CPU0:router# configure
Enters the Global Configuration mode.
Step 2
l2vpn
Example:
RP/0/RSP0/CPU0:router(config)# l2vpn
RP/0/RSP0/CPU0:router(config-l2vpn)#
Enters L2VPN configuration mode.
Step 3
bridge group bridge-group-name
Example:
RP/0/RSP0/CPU0:router(config-l2vpn)# bridge group csco
RP/0/RSP0/CPU0:router(config-l2vpn-bg)#
Creates a bridge group that can contain bridge domains, and then assigns network interfaces to the bridge domain.
Step 4
bridge-domain bridge-domain-name
Example:
L2VPN and Ethernet Services Configuration Guide for Cisco ASR 9000 Series Routers, IOS XR Release 6.3.x
How to Implement Multipoint Layer 2 Services
229
Advertisement
Table of Contents
