Monitoring Per-Port Interface Statistics - Cisco ASR 1000 Series Software Configuration Manual
Aggregation services routers sip and spa, cisco ios xe everest 16.5
Hide thumbs
Also See for ASR 1000 Series:
- Configuration manual (442 pages) ,
- Replacing (120 pages) ,
- Common criteria operational user guidance and preparative procedures (72 pages)
Table of Contents
Advertisement
Configuring the ATM SPAs
4095 maximum active VCs, 1 current VCCs
VC Auto Creation Disabled.
VC idle disconnect time: 300 seconds
4 carrier transitions
Last input never, output 00:04:11, output hang never
Last clearing of "show interface" counters never
Input queue: 0/375/0/0 (size/max/drops/flushes); Total output drops: 0
Queueing strategy: fifo
Output queue: 0/40 (size/max)
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
Monitoring Per-Port Interface Statistics
Use the show controllers atm command to display detailed status and statistical information on a per-port
basis for an ATM SPA. The following example provides sample output for interface port 2 on the ATM SPA
that is located in subslot 2 of the SIP that is installed in slot 0 of a Cisco ASR 1000 Series Router:
Router# show controllers atm 0/2/2
Interface ATM0/2/2 (SPA-3XOC3-ATM-V2[0/2]) is up
Framing mode: SONET OC3 STS-3c
SONET Subblock:
SECTION
LOF = 0
LINE
AIS = 0
PATH
AIS = 0
LOP = 1
Active Defects: None
Active Alarms:
Alarm reporting enabled for: SF SLOS SLOF B1-TCA B2-TCA PLOP B3-TCA
ATM framing errors:
HCS (correctable):
HCS (uncorrectable): 0
APS
not configured
COAPS = 0
State: PSBF_state = False
Rx(K1/K2): 00/00
Rx Synchronization Status S1 = 00
S1S0 = 00, C2 = 13
PATH TRACE BUFFER : STABLE
BER thresholds:
TCA thresholds:
Clock source:
Configuration Examples
This section includes the following configuration examples for the ATM SPAs:
OL-14127-17
5 packets input, 540 bytes, 0 no buffer
Received 0 broadcasts (0 IP multicasts)
0 runts, 0 giants, 0 throttles
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
5 packets output, 540 bytes, 0 underruns
0 output errors, 0 collisions, 1 interface resets
0 output buffer failures, 0 output buffers swapped out
LOS
= 1
RDI
= 1
RDI
= 1
NEWPTR = 0
None
0
PSBF = 0
Tx(K1/K2): 00/00
SF = 10e-3
B1 = 10e-6
line
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
FEBE = 55
FEBE = 21
PSE
= 0
SD = 10e-6
B2 = 10e-6
B3 = 10e-6
Monitoring Per-Port Interface Statistics
BIP(B1) = 0
BIP(B2) = 0
BIP(B3) = 0
NSE
= 0
Everest 16.5
87
Advertisement
Chapters
Table of Contents
Troubleshooting
