Mac Address Configuration - Cisco ASR 1000 Series Software Configuration Manual

Aggregation services routers sip and spa, cisco ios xe everest 16.5

Hide thumbs Also See for ASR 1000 Series:

Table of Contents

MAC Address Configuration

interface port 1 on the SPA that is located in subslot 0 of the SIP that is installed in slot 0 of the Cisco ASR

1000 Series Routers:

! Enter global configuration mode.

! Enter configuration commands, one per line. End with CNTL/Z.

! Specify the interface address.

Router(config)#

! Configure an IP address.

Router(config-if)#

! Start the interface.

Router(config-if)#

! Save the configuration to NVRAM.

Router(config-if)#

MAC Address Configuration

The following example shows how to change the default MAC address on the interface to 1111.2222.3333:

! Enter global configuration mode.

! Enter configuration commands, one per line. End with CNTL/Z.

Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS

XE Everest 16.5

configure terminal

interface gigabitethernet 0/0/1

ip address 192.168.50.1 255.255.255.0

copy running-config startup-config

configure terminal

Configuring the Ethernet SPAs

Table of Contents