Configuration Tasks - Cisco ASR 1000 Series Software Configuration Manual

Aggregation services routers sip and spa, cisco ios xe everest 16.5

Hide thumbs Also See for ASR 1000 Series:

Table of Contents

Configuring the 4-Port Serial Interface SPA

This chapter provides information about configuring the 4-Port Serial Interface SPA on Cisco ASR 1000

Series Routers.

Configuration Tasks

This section describes how to configure the 4-Port Serial Interface SPA for the Cisco ASR 1000 Series Routers

and verify the configuration. For information about managing your system images and configuration files,

refer to the following:

Configuring the 4-Port Serial Interface SPA

To configure the 4-Port Serial Interface SPA, complete these steps:

SUMMARY STEPS

1. Router# configure terminal

2. Router(config)# interface serial slot/subslot/port

3. Router(config-if)# ip address address mask

4. Router(config-if)# clock rate bps

Configuration Tasks, page 277

Verifying the Interface Configuration, page 287

Configuration Examples, page 288

Cisco ASR 1000 Series Aggregation Services Routers Software Configuration Guide

Cisco IOS Configuration Fundamentals Configuration Guide

Cisco IOS Configuration Fundamentals Command Reference

Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE

C H A P T E R

Everest 16.5

Table of Contents