Model - Cisco ASR 1000 Series Software Configuration Manual
Aggregation services routers sip and spa, cisco ios xe everest 16.5
Hide thumbs
Also See for ASR 1000 Series:
- Configuration manual (442 pages) ,
- Replacing (120 pages) ,
- Common criteria operational user guidance and preparative procedures (72 pages)
Table of Contents
Advertisement
Configuring the RTCP on the SPA-DSP on the Cisco Unified Border Element for the Distributed Model
Command or Action
Step 4
rtcp-regenerate
Example:
Router(config-sbc)# rtcp-regenerate
Configuring the RTCP on the SPA-DSP on the Cisco Unified Border Element
for the Distributed Model
To configure the RTCP on the SPA-DSP on the Cisco Unified Border Element for the Distributed Model,
perform the following steps:
SUMMARY STEPS
1. enable
2. configure terminal
3. sbc sbc-name dbe
4. rtcp-regenerate
DETAILED STEPS
Command or Action
Step 1
enable
Example:
Router> enable
Step 2
configure terminal
Example:
Router# configure terminal
Step 3
sbc sbc-name dbe
Example:
Router(config)# sbc mySBC
Step 4
rtcp-regenerate
Example:
Router(config-sbc-dbe)# rtcp-regenerate
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS
XE Everest 16.5
414
Configuring the Cisco DSP SPA for the ASR 1000 Series Aggregation Services Routers
Purpose
Enables the generation and termination of the RTCP packets on
the SPA-DSP for the Unified Model.
Purpose
Enables the privileged EXEC mode. Enter your password if
prompted.
Enters the global configuration (config) mode.
Creates the Data Border Element (DBE) service on the SBC and
enters the SBC-DBE configuration mode (config-sbc-dbe).
dbe
Enables the generation and termination of the RTCP packets on
the SPA-DSP for the Distributed Model.
OL-14127-17
Advertisement
Chapters
Table of Contents
Troubleshooting
