hit counter script

Cisco ASR 1000 Series Software Configuration Manual page 513

Aggregation services routers sip and spa, cisco ios xe everest 16.5
Table of Contents

Advertisement

Overview of the Circuit Emulation over Packet Shared Port Adapter
The restrictions pertaining to the SPA-2CHT3-CE-ATM in Cisco IOS XE Release 3.6.0S are:
• CESoPSN over L2TPv3 is not supported.
• SAToP over L2TPv3 is not supported.
• Network clocking is not supported.
• Differential clock recovery is not supported.
• Out-of-band clock recovery is not supported.
Scalability
The scalability details pertaining to the permanent virtual circuits (PVCs) supported by the
SPA-2CHT3-CE-ATM are as follows:
• A maximum of 1024 PVCs on a CEoP card.
• A maximum of 255 PVPs per port on a CEoP card.
• ATM interfaces on the 2-port T3 CEoP (in the clear-channel mode).
The scalability details of the SPA-24CHT1-CE-ATM are as follows:
• Maximum number of DS0s configurable on a 24-port T1/E1 SPA are as follows:
• T1 can support a maximum of 24 possible CEM groups.
• E1 can support a maximum of 31 possible CEM groups.
• Total number of CEM groups that can be configured per SPA-24CHT1-CE-ATM are 191.
The scalability details of the SPA-2CHT3-CE-ATM are as follows:
• Maximum number of DS0s configurable on a 2-port T3/E3 SPA are as follows:
• Total number of CEM groups that can be configured per SPA-2CHT3-CE-ATM are 576.
Supported MIBs
Effective from Cisco IOS XE Release 3.3.0S, the following MIBs are supported for the SPA-1CHOC3-CE-ATM
on the Cisco ASR 1000 Series Routers:
• ENTITY-MIB
• CISCO-ENTITY-SENSOR-MIB
OL-14127-17
◦ 24 T1 x 24 DS0s = 576
◦ 24 E1 x 31 DS0s = 744
◦ 2 T3 x 28 T1 x 24 DS0 = 1344
◦ 2 T3 x 21 E1 x 31 DS0 = 1302
Cisco ASR 1000 Series Aggregation Services Routers SIP and SPA Software Configuration Guide, Cisco IOS XE
Scalability
Everest 16.5
467

Advertisement

Table of Contents
loading

Table of Contents