Cisco ASR 9000 Series User Configuration Manual page 107
Aggregation services router
Hide thumbs
Also See for ASR 9000 Series:
- Command reference manual (1138 pages) ,
- Routing configuration manual (702 pages) ,
- Reference manual (696 pages)
Table of Contents
Advertisement
Software Entitlement
Command or Action
Step 2
show license udi
Example:
RP/0/RSP0/CPU0:router(admin)# show license
udi
Mon Jul 13 04:36:32.715 PST
Local Chassis UDI Information:
PID
S/N
Operation ID: 1
Step 3
http://www.cisco.com/go/license
Step 4
Copy the license to your TFTP server.
Step 5
admin
Example:
RP/0/RSP0/CPU0:router# admin
Step 6
license add license-name [ sdr sdr-name ]
Example:
RP/0/RSP0/CPU0:router(admin)# license add
tftp://192.10.10.10/mylicenses/lc40g_lic
Step 7
configure
Example:
RP/0/RSP0/CPU0:router(admin)# configure
Step 8
license license-name location {all | node-id}
Example:
RP/0/RSP0/CPU0:router(admin-config)#
license A9K-ADV-OPTIC-LIC
location 0/0/CPU0
: ASR-9010-AC
: FOX1232H67M
Cisco ASR 9000 Series Aggregation Services Router System Management Configuration Guide, Release 5.1.x
Configure Licenses Using Default Licensing
Purpose
Displays the UDI of the chassis. This consists of a product identifier
(PID), serial number (S/N), and operation identifier (Operation ID).
Go to the license tool on Cisco.com. You must log in to the site
before you can access the license tool. Follow the instructions for
product license registration. You are required to enter the feature
PAK and the chassis UDI to acquire the license.
Note
If you are installing a permanent license, you should have
received the PAK when you purchased the feature. If you
are installing an evaluation license, your sales representative
should provide you with the PAK.
You will be issued a license. You can copy the license and store it
on your computer, or alternatively, you can request that the license
be sent to you in an e-mail. When you have received the license,
copy it to a TFTP server that is accessible by your router.
Enters administration EXEC mode.
Adds the license to the SDR license pool. By default, the license is
added to the owner SDR license pool.
Enters administration configuration mode.
(Optional) Binds the license to the slot where it is to be used.
Note
Beginning with Cisco IOS XR Release 4.3.1, this command
is optional. If you do not use this command, it is configured
as though the license is bound to all slots.
89
Advertisement
Table of Contents
Troubleshooting
