Documenting The Settings For The Basic Functions, Firmware V4.4 - Siemens SINAMICS G120 Operating Instructions Manual
Low voltage inverters
built-in units with cu250s-2 control units and
encoder evaluation
Hide thumbs
Also See for SINAMICS G120:
- List manual (1256 pages) ,
- Manual (732 pages) ,
- Operating instructions manual (550 pages)
Table of Contents
Advertisement
Appendix
A.6 Acceptance tests for the safety functions
A.6.4
Documenting the settings for the basic functions, firmware V4.4 ... V4.7 SP6
Drive = <pDO-NAME_v>
Table A-10
Firmware version
Name
Control Unit firmware version
SI version, safety functions integrated in the drive (processor 1)
Table A-11
Monitoring cycle
Name
SI monitoring clock cycle (processor 1)
Table A-12
Checksums
Name
SI module identifier, Control Unit
SI module identifier, Power Module
SI reference checksum SI parameters (processor 1)
SI reference checksum SI parameters (processor 2)
Table A-13
Settings of the safety functions
Name
SI enable, functions integrated in the drive
Only for the CU250S-2 Control Unit
SI PROFIsafe address
F-DI switch over discrepancy time
SI STO debounce time
Only for the CU250S-2 Control Unit
SI forced dormant error detection timer
SI forced checking procedure STO via PM terminals time
Table A-14
Safety logbook
Name
SI change control checksum
SI change control checksum
SI change control time stamp
SI change control time stamp
518
SI enable safe brake control
SI Safe Stop 1 delay time
Operating Instructions, 04/2018, FW V4.7 SP10, A5E31759476B AG
Number
Value
r18
<r18_v>
r9770
<r9770_v>
Number
Value
r9780
<r9780_v>
Number
Value
r9670
<r9670_v>
r9672
<r9672_v>
p9799
<p9799_v>
p9899
<p9899_v>
Number
Value
p9601
<p9601_v>
p9602
<p9602_v>
p9610
<p9610_v>
p9650
<p9650_v>
p9651
<p9651_v>
p9652
<p9652_v>
p9659
<p9659_v>
p9661
<p9661_v>
Number
Value
r9781[0]
<r9781[0]_v>
r9781[1]
<r9781[1]_v>
r9782[0]
<r9782[0]_v>
r9782[1]
<r9782[1]_v>
Converter with the CU250S-2 Control Units
Advertisement
Table of Contents
