Table of Contents
Advertisement
Chapter 3
Device Management
is encoded into the electronic signature of the device. This feature key is independent of the compact flash card
or USB Mass Storage drive, and is retained by the device itself should the card be replaced. Additional file-based
feature keys can be added as needed. File-based feature keys are stored on the compact flash card or a USB
Mass Storage drive, and can be moved from device to device.
NOTE
Some RUGGEDCOM ROX II features are only available through the purchase of feature levels. For
more information about the available feature levels, refer to the product data sheet for the device
available at
NOTE
File-based feature keys can be used on different devices. To tie a feature key to a specific device,
contact a Siemens Canada Ltd. Sales representative to arrange for a RMA (Return to Manufacturer
Authorization) to program the feature key into the device.
When ordering feature levels, make sure to provide the main serial number for the device. An upgraded feature
key file will be provided that is licensed to the device. For information on how to determine the main serial
number, refer to
Section 3.1, "Determining the Product
The following sections describe how to manage feature keys:
•
Section 3.13.1, "Viewing the Contents of a Feature Key"
•
Section 3.13.2, "Installing Feature Keys"
Section 3.13.1
Viewing the Contents of a Feature Key
To view the contents of a feature key saved on the device, do the following:
1.
Make sure the CLI is in Operational mode.
2.
At the command prompt, type:
file show-featurekey filename
Where:
• filename is the name of feature key file stored on the device
For example:
ruggedcom# file show-featurekey 1_cmRX1K-12-11-0015.key
3.
Press Enter. The system displays the contents of the feature key file.
ruggedcom# file show-featurekey 1_cmRX1K-12-11-0015.key
GPG_FEATUREKEY_LEVEL=1
GPG_FEATUREKEY_CM_SERIALNUMBER=RX1K-12-11-0015
GPG_FEATUREKEY_SIGNATURE=iEYEABECAAYFAk091pAACgkQP2pya+G5kdZeKACeKdHUB2G1T73Dymq8IjSdYDK
AiskAn3abBpCEhfLXxY2ZlVbvGNwDZow2
ruggedcom#
82
www.siemens.com/ruggedcom
or contact a Siemens Sales representative.
Version".
RUGGEDCOM ROX II
CLI User Guide
Viewing the Contents of a Feature Key
Advertisement
Table of Contents
Troubleshooting
