16:9
Adjust the picture horizontally, in a linear
proportion to fill the entire screen.
Just Scan
Normally the edges of video signals are
cropped 1-2%. Just Scan turns off this
cropping and shows the complete video.
Notes: If there is noise on the edges of the
original signal, it will be visible when Just Scan
is activated.
Just Scan
Original
When your TV receives a wide screen signal it will
automatically change to the picture format broad-
cast.
Original
Full Wide
When TV receives the wide screen signal,it will lead
you to adjust the picture horizontally or vertically, in a
linear proportion,to fill the entire screen fully. 4:3 and
14:9 video is supported in full screen without any
video distortion through DTV input
Full Wide
Set By Program
Selects the proper picture proportion to
match the source's image.
(4:3
4:3)
Set By Program
(16:9
16:9)
Set By Program
14:9
You can view a picture format of 14:9 or a general TV
programme in the 14:9 mode. The 14:9 screen is
viewed in the same way as in 4:3, but is moved to the
up and down.
4:3
Choose 4:3 when you want to view a picture
with an original 4:3 aspect ratio.
Zoom
Choose Zoom when you want to view the
picture without any alteration. However, the
top and bottom portions of the picture will
be cropped.
Cinema Zoom 1
Choose Cinema Zoom when you want to
enlarge the picture in correct proportion.
This enlarges an image with cinemascope
aspect ratio (2.35:1) without distortion.
Note: When enlarging or reducing the pic-
ture, the image may become distorted.
127