Rack Specifications; Overview Of Racks; General Requirements For Cabinets And Racks - Cisco Nexus 9348GC-FXP Hardware Installation Manual

Aci mode

Hide thumbs Also See for Nexus 9348GC-FXP:

Table of Contents

Rack Specifications

•

You can install the switch in the following types of cabinets and racks, assuming an external ambient air

temperature range of 0 to 104°F (0 to 40°C):

• Standard perforated cabinets

• Solid-walled cabinets with a roof fan tray (bottom to top cooling)

• Standard open racks

Note

If you are selecting an enclosed cabinet, we recommend one of the thermally validated types, either standard

perforated or solid-walled with a fan tray.

Note

We do not recommend that you use racks that have obstructions (such as power strips), because the obstructions

could impair access to field-replaceable units (FRUs).

The cabinet or rack must also meet the following requirements:

• Standard 19-inch (48.3 cm) (two- or four-post EIA cabinet or rack, with mounting rails that conform to

Overview of Racks, on page 43

General Requirements for Cabinets and Racks, on page 43

Requirements Specific to Standard Open Racks, on page 44

Requirements Specific to Perforated Cabinets, on page 44

Cable Management Guidelines, on page 44

English universal hole spacing per section 1 of ANSI/EIA-310-D-1992). For more information, see

Requirements Specific to Perforated Cabinets, on page

A P P E N D I X

44.

Cisco Nexus 9348GC-FXP ACI Mode Hardware Installation Guide

Table of Contents