Cisco Nexus 7000 Series Command Reference Manual page 337
Nx-os mpls
Hide thumbs
Also See for Nexus 7000 Series:
- Command reference manual (1018 pages) ,
- Reference manual (746 pages) ,
- Configuration manual (536 pages)
Table of Contents
Advertisement
Show Commands
show ip rsvp sender
To display the Resource Reservation Protocol (RSVP) path status, use the show ip rsvp sender
command.
Syntax Description
destination
ip-address
sender
ip-address
dst-port
port
src-port
port
detail
Defaults
None
Command Modes
EXEC mode
Supported User Roles
network-admin
vdc-admin
Command History
Release
5.2(1)
Usage Guidelines
This command requires the MPLS Services license.
Examples
This example shows how to display the detailed RSVP path status:
switch# show ip rsvp sender detail
PATH:
Tun Dest: 10.10.0.6 Tun ID: 100 Ext Tun ID: 10.10.0.1
Tun Sender: 10.10.0.1 LSP ID: 31
Path refreshes:
arriving: from PHOP 10.10.7.1 on Et0/0 every 30000 msecs
Session Attr:
Setup Prio: 7, Holding Prio: 7
Flags: (0x7) Local Prot desired, Label Recording, SE Style
OL-24994-01
show ip rsvp sender [destination ip-address] [sender ip-address] [dst-port port] [src-port port]
[detail]
(Optional) Specifies the path based on a destination IP address.
Destination IP address.
(Optional) Specifies the path based on a source IP address.
Source IP address.
(Optional) Specifies the path based on a destination port.
Destination port value. The range is from 0 to 2147483647.
(Optional) Specifies the path based on a source port.
Source port value. The range is from 0 to 2147483647.
(Optional) Specifies the detailed RSVP status.
Modification
This command was introduced.
Cisco Nexus 7000 Series NX-OS MPLS Command Reference
show ip rsvp sender
1259
Advertisement
Table of Contents
