Table of Contents
Advertisement
Configuration and operation
4.7 Configuration in STEP 7 Basic
4.7.5
"Serial Interface" parameter group
"SMS"
If the CP is intended to use the sending of SMS messages, you need to activate the option.
Here you assign the number for an SMSC (Short Message Service Center).
"WAN Parameters": Adoption of parameters from STEP 7 V5
The following parameters are only displayed after you have imported the configuration data
of the station from the STEP 7 V5 project.
The displayed parameters are shown alongside the corresponding parameters in STEP 7
V5. Depending on the configuration of the CP (protocol, network type, station type) not every
parameter is displayed.
In the text file of the configuration data you will find the parameters in the SDBs "WAN data"
and "Ethernet data".
Parameter group "WAN Parameters"
Parameter in STEP 7 Basic /
Professional
InterfaceNumber
TIMType
NetworkType
OperationMode
TelegrammFormat
AcknowledgeArt
RepeatingFactor
Duplex
TelecontrolProtokoll
OwnSTA
MaxTelegrammLength
LocalCPUCount
62
Parameter in STEP 7 V5
Number of the interface
Node type
Network type
Operating mode
Message format
Acknowledgment
Retry factor
Connection type
WAN protocol
WAN address
Max. message length
Configuration in STEP 7 V5
Properties TIM > "Interfaces"
tab
Properties WAN network
nodes > "Network Connec-
tion" tab
HW Config
Properties Network > "Net-
work Settings"
Properties Network > "Net-
work Settings"
Properties Network > "Net-
work Settings"
Properties Network > "Net-
work Settings"
Properties Network > "Net-
work Settings"
Properties Network > "Net-
work Settings"
Properties WAN network
nodes > "Network Connec-
tion" tab
Properties Network > "Net-
work Settings"
Operating Instructions, 06/2015, C79000-G8976-C385-01
Remarks
With Ethernet nodes derived
from "Connection mode"
(Properties TIM > "Interfac-
es" tab)
With Ethernet networks
("Random") cannot be set
With Ethernet preassigned
with "3"
Own WAN address (station
address)
Number of local CPUs
CP 1243-8 IRC
Advertisement
Table of Contents
