Siemens Sinumerik 840D Series Function Manual page 131
Hla module
Hide thumbs
Also See for Sinumerik 840D Series:
- Function manual (920 pages) ,
- Diagnostics manual (714 pages) ,
- Operating turning (713 pages)
Table of Contents
Advertisement
08.99
10.03
5285
OUTPUT_FIL_1_DAMP [n]
Damping of control output filter 1
Unit:
Default:
-
1.0
5288
OUTPUT_FIL_1_SUP_FREQ [n]
Blocking frequency of control output filter 1
Unit:
Default:
Hz
3500.0
5289
OUTPUT_FIL_1_BW [n]
Bandwidth of control output filter 1
Unit:
Default:
Hz
500.0
5290
OUTPUT_FIL_1_BW_NUM [n]
Numerator bandwidth for control output filter 1
Unit:
Default:
Hz
0.0
Siemens AG, 2003. All rights reserved
SINUMERIK 840D/SIMODRIVE 611 digital, HLA Module (FBHLA) - 10.03 Edition
0...7 index of the parameter set
Minimum:
Maximum:
0.05
1.0
Enter damping for control output filter 1 (PT2 low-pass).
0...7 index of the parameter set
Minimum:
Maximum:
1.0
7999.0
Enter blocking frequency for control output filter 1 (bandstop)
0...7 index of the parameter set
Minimum:
Maximum:
5.0
7999.0
Enter -3dB bandwidth for control output filter 1 (bandstop).
0...7 index of the parameter set
Minimum:
Maximum:
0.0
7999.0
Enter the numerator bandwidth for control output filter 1 (damped bandstop).
Entering a value of 0 initializes the filter as an unattenuated bandstop filter. The
value set in MD 5290 must not exceed twice the value set in MD 5289.
4 Firmware Drive Functions
4.5 Manipulated voltage output
Cross reference: -
Related to:
Protection level:
HLA
3/3
Data type:
Active:
FLOAT
Immediately
Cross reference: -
Related to:
Protection level:
HLA
3/3
Data type:
Active:
FLOAT
Immediately
Cross reference: -
Related to:
Protection level:
HLA
3/3
Data type:
Active:
FLOAT
Immediately
Cross reference: -
Related to:
Protection level:
HLA
3/3
Data type:
Active:
FLOAT
Immediately
4-131
- Quick Links:
- Typical Applications
- General
- Drive Configuration
Hide quick links:
Advertisement
Table of Contents
