English CORDLESS SELF-DRILLING SCREWDRIVER DCF622 Congratulations! EC-Declaration of Conformity You have chosen a D WALT tool. Years of experience, thorough Machinery Directive product development and innovation make D WALT one of the most reliable partners for professional power tool users. Technical Data Cordless Self-Drilling Screwdriver DCF622 DCF622...
English h ) Do not let familiarity gained from frequent use of contacts eyes, additionally seek medical help. Liquid tools allow you to become complacent and ignore ejected from the battery may cause irritation or burns. tool safety principles. A careless action can cause severe e ) Do not use a battery pack or tool that is damaged injury within a fraction of a second.
English Mains Plug Replacement Make sure that cord is located so that it will not be • stepped on, tripped over, or otherwise subjected to (U.K. & Ireland Only) damage or stress. If a new mains plug needs to be fitted: •...
English Charger Cleaning Instructions Charge Indicators WARNING: Shock hazard. Disconnect the charger Charging from the AC outlet before cleaning. Dirt and grease may be removed from the exterior of the charger using a Fully Charged cloth or soft non-metallic brush. Do not use water or any cleaning solutions.
English WARNING: Fire hazard. Do not store or carry the Transport Mode: When the cap is attached to the FLEXVOLT battery pack so that metal objects can contact battery, the battery is in Transport mode. Keep the cap for exposed battery terminals. For example, do not place shipping.
English Example: Discard the battery pack with due care for 2019 XX XX the environment. Year of Manufacture Charge D WALT battery packs only with designated Description (Fig. A, C) WALT chargers. Charging battery packs other than WARNING: Never modify the power tool or any part of it. the designated D WALT batteries with a D WALT...
English To Install the Battery Pack into the Tool Handle When changing the position of the control lever, be sure the trigger is released. 1. Align the battery pack 11 with the rails inside the tool’s nOTE: The first time the tool is run after changing the direction handle (Fig.
English Quick-Change Chuck (Fig. A, F) nOTE: The chuck accepts 6.35 mm hex accessories. Cleaning Place the forward/reverse control lever 6 in the lock-off (centre) position and remove battery pack before changing accessories. WARNING: Blow dirt and dust out of the main housing To install an accessory, pull the quick-change sleeve ...
Page 16
Belgique et WALT - Belgium BVBA Tel: NL 32 15 47 37 63 www.dewalt.be Luxembourg België en Luxemburg Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 enduser.BE@SBDinc.com 2800 Mechelen Fax: 32 15 47 37 99 Danmark WALT (Stanley Black&Decker AS)