Sony SLV-N650 Operating Instructions Manual page 33

Sony vcr user manual

Table of Contents

To watch another TV program while recording

Press TV/VIDEO to turn off the VCR indicator in the display window.

If your TV is connected to the VCR using A/V connections, set the TV to the

TV's antenna input; if not, skip this step.

Select another channel on the TV.

To save a recording

To prevent accidental erasure, break

off the safety tab as illustrated. To

record on the tape again, cover the tab

hole with adhesive tape.

Tips

• To select a channel, you can use the number buttons on the remote commander. Enter the

channel number, then press ENTER.

• You can select a video source from the LINE IN 1 or LINE-2 IN jacks using the INPUT

SELECT button.

• The display appears on the TV screen indicating information about the tape, but the

information will not be recorded on the tape.

• If you do not want to watch TV while recording, you can turn off the TV. When using a cable

box, make sure to leave it on.

Notes

• The remaining tape length may not be indicated accurately for short tapes such as T-20 or T-

30, or tapes recorded in the LP mode.

• The display does not appear during still (pause) mode or slow-motion playback.

• It may take up to one minute for the VCR to calculate and display the remaining tape length

after you press DISPLAY.

Safety tab

Recording TV programs

Table of Contents

Show Quick Links

Table of Contents

Slv-n750 N750 - slv - vcr