Table of Contents
Advertisement
vEdge 100b Router
Figure 3: Positioning the vEdge 100b Router in the Rack
1. Secure the mounting ears to the two front posts of the rack using the four rack-mount screws (two on each
side) in the packet marked B. Tighten the screws.
Figure 4: Attaching the Mounting Ears to the Rack
1. Use a tape measure or level to verify that the tray is installed straight and the holes at either ends of the
rack align properly.
Install the vEdge 100b Router
Hardware Installation Guide for vEdge Routers
39
Advertisement
Table of Contents
Troubleshooting
