hit counter script

Siemens SINUMERIK 840Di Function Manual page 1572

Basic machine
Hide thumbs Also See for SINUMERIK 840Di:
Table of Contents

Advertisement

Detailed Description
2.5 Programming
Motion settings
The direction of rotation is specified in DBB30 and transmitted by the NCK input signals at
the axial VDI interface (PLC -> NCK) in data bytes DB31, ... DBB30 (JobShop).
Interface signals
"Spindle stop" (equivalent to M5)
"Spindle start clockwise" (equivalent to M3)
"Spindle start counter-clockwise" (equivalent to M4)
"Select gear step"
(function in preparation)
"Spindle positioning" (corresponds to M19)
Priorities
If several DBB30 signals are set at the same time, the following order of priority is defined:
Spindle stop (M5)
Spindle start/Positioning mode (M3)
Spindle start/Positioning mode (M4)
Spindle start/Positioning mode (M19)
Acknowledgment spindle start/stop
A spindle start can be detected at the VDI interface based on traversing commands output:
DB31, ... DBX64.6 = 1 (traversing command minus)
or
DB31, ... DBX64.7 = 1 (traversing command plus).
A spindle stop is executed if NC/PLC IS:
DB31, ... DBX61.4 = 1 (axis/spindle stationary)
is output.
Direct acknowledgment signals for the DBB30 input signals are not output.
Invert M3/M4
NC/PLC interface signal:
DB31, ... DBX17.6 (invert M3/M4)
acts on NC/PLC IS:
DB31, ... DBX30.1 (spindle start CW)
and
DB31, ... DBX30.2 (spindle start CCW)
in the same way as for direction of rotation programming for M3 or M4 via part program,
synchronized action, or FC18.
2-68
DB31, ... DBX30.0
DB31, ... DBX30.1
DB31, ... DBX30.2
DB31, ... DBX30.3
(reserved signal)
DB31, ... DBX30.4
1. Priority
2. Priority
3. Priority
4. Priority
Function Manual, 08/2005 Edition, 6FC5397-0BP10-0BA0
Spindles (S1)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents