2-8. HINGE ASSEMBLY
q; Hinge assembly
7 FP-461 flexible board
6 Screw
(M1.7 × 2.5)
3 Two claws
4 Front hinge cover
2-9. CK-131 BOARD
Caution
Attach the Tape (A) as shown
in the illustration.
Tape (A)
5 Rear hinge cover
1 Two screws
(M1.7 × 2.5)
3 Loud speaker (2P)
4 FP-635 flexible
2 Tape (A)
1 FP-668
flexible board (51P)
2-7
DCR-TRV38/TRV38E/TRV39
2 Screw
(M1.7 × 2.5)
Remove the Harness (PC-121),
(PC-122) in the direction of the arrow.
Bend the Harness (PC-121), (PC-122)
along with connector
8 Harness (PC-122) (10P)
9 Harness (PC-121) (20P)
board (6P)
5 Two tapping screws
(M1.7 × 3.5)
6 CK-131 board