Table of Contents
Advertisement
3.3
Switching on the device
3.3
Procedure
1. Plug the power plug of the supplied power supply cable in the AC power supply
2. Screw-mount the power plug lock (1).
Figure 3-1
3. Interlock the power plug as shown.
4. Plug the power supply cable into a socket with a grounded protective conductor.
5. Switch on the power switch of the device.
When the self test is finished, the operating system will be loaded.
Panel PC IL 77
QuickStart, Edition 10/2004, A5E00327597-01
connector of the device.
Interlock the power plug
The device starts up and boots.
Self test
After connection to the power supply, the device performs a self test. During the self test,
the message "Press <F2> to enter SETUP" appears briefly.
Unpacking and connecting the device
3.3 Switching on the device
3-3
Advertisement
Table of Contents
