Table of Contents
Advertisement
Cable: 4 ft RG174 VW-1 compliant
Height and base diameter: 90 mm and 137 mm
Temperature rating: -40° to 185°F (-40° to 85°C)
Mounting: 5/8-inch lug with serrated face nut (5/8-inch diameter hole through mounting surface)
Can be used with the following cable extensions: 4G-CAB-ULL-20 and 4G-CAB-ULL-50
4G-LTE-ANTM-O-3-X
Description:
Multiband low profile indoor or outdoor omnidirectional antenna (IP67 ingress protection)
Ceiling mount, dual 4G LTE and standalone GPS
Electrical Specifications:
Frequency range: 698 to 960 MHz and 1710 to 2700 MHz
Gain: 2.5 dBi
Maximum power: 3W
Connector: SMA with TNC male adapters, and SMA for GPS
VSWR: < 2.5:1
Nominal impedance: 50 Ohms
Polarization: linear vertical
Mechanical Specifications:
Radome material: white, black, red, or blue ABS, UL-94 V0
Cable: 4 ft RG174 VW-1 compliant
Height and base diameter: 90 mm and 137 mm
Temperature rating: -40° to 185°F (-40° to 85°C)
Mounting: 5/8-inch lug with serrated face nut (5/8-inch diameter hole through mounting surface)
Can be used with the following cable extensions: 4G-CAB-ULL-20 and 4G-CAB-ULL-50
4G-LTE-ANTM-D
Description:
Omnidirectional dipole antenna is designed for indoor use with Cisco 4G and Cisco 3G wireless Integrated Services
Routers Generation 2 systems
Articulating Joint —It can be rotated 360 degrees and is capable of maneuvering into three stop positions: 0 degrees,
45 degrees, and 90 degrees.
Male threaded Neill-Concelman (TNC) Connector —It lets you directly mount the antenna to any Cisco 4G and Cisco
3G wireless Integrated Services Router (ISR) EHWIC with a TNC connector (Cisco 4G-LTE-ANTM-D Ominidirectional
Dipole Antenna, TNC Connector, and Articulation Joint). The threads on the connector must comply with the ANSI
7/16-28 UNEF 2B thread specification.
Electrical Specifications:
22
Advertisement
Table of Contents
