Table of Contents
Advertisement
3.
Align the mounting brackets over the mounting holes so that the larger holes on the brackets extend out over the
router.
4.
Attach the brackets to the router with the 4 screws provided using a Phillips head driver. Torque to 13-15 in-lbs.
5.
Mount the router with the attached brackets to the wall using screws that are adequate for your mounting area.
6.
Route the cables so that they do not put a strain on the connectors or mounting hardware.
Installing a DIN Rail
The DIN Rail kit is ordered separately.
The DIN Rail can be installed in two different orientations, horizontally and vertically.
To attach the DIN rail bracket to the Cisco IR807, follow these steps.
Mounting the DIN Rail Bracket on the Router
1.
First, attach the DIN rail bracket to the back of the router. The DIN rail bracket mounts in two different ways,
depending on the orientation you wish to use. See
orientation.
Figure 3
Attaching the DIN Rail Bracket for vertical mounting
Figure 3
for vertical orientation, and
32
Figure 4
for horizontal
Advertisement
Table of Contents
