Remove Poe Power Supply Slot Filler; Install The Poe Converter Power Supply - Cisco 4000 Series Hardware Installation Manual
Integrated services routers
Hide thumbs
Also See for 4000 Series:
- Upgrade manual (24 pages) ,
- Installation manual (18 pages) ,
- Manual (52 pages)
Table of Contents
Advertisement
PoE Converter Power Supply Unit
Remove PoE Power Supply Slot Filler
Remove the bezel and fan tray from the router.
Step 1
Loosen the screws from the securing nuts on the chassis. See
Step 2
Gently pull out the filler from the filler tab on the chassis.
Step 3
Figure 5-46
1
1
3
5
Install the PoE Converter Power Supply
Remove the bezel and fan try from the router chassis. See
Step 1
Remove the PoE converter power supply filler. For instructions, see
Step 2
Filler".
Open the slot latch before inserting the PoE converter power supply module.
Step 3
Rotate latch to close it.
Step 4
Tighten the screws on the module to secure it to the router chassis.See
Step 5
Hardware Installation Guide for Cisco 4000 Series Integrated Services Routers
5-58
Install or Remove PoE Fillers
Install tab into slot on chassis
PoE filler shown installed in PoE slot 1
Rotate to secure screw into securing nut in
chassis
Chapter 5
2
6
5
2
POE filler being installed in PoE slot 0
4
PoE slot 1
6
PoE slot 0
Install and Upgrade Internal Modules and FRUs
Figure 5-46
for details.
3
4
Replace Fan Tray, page
5-61.
"Remove PoE Power Supply Slot
Figure 5-47
for details.
OL-32185-02
Hide quick links:
Advertisement
Table of Contents
