Cisco 4000 Series Hardware Installation Manual page 68
Integrated services routers
Hide thumbs
Also See for 4000 Series:
- Upgrade manual (24 pages) ,
- Installation manual (18 pages) ,
- Manual (52 pages)
Table of Contents
Advertisement
Required Tools and Equipment for Installation and Maintenance
You need the following tools and equipment to install and upgrade the router and its components:
ESD-preventive cord and wrist strap
•
Number 2 Phillips screwdriver
•
Phillips screwdrivers: small, 3/16-in. (4 to 5 mm) and medium, 1/4-in. (6 to 7 mm)
•
–
–
Screws that fit your rack
•
Wire crimper
•
Wire for connecting the chassis to an earth ground:
•
–
–
–
•
For NEC-compliant grounding, an appropriate user-supplied ring terminal, with an inner diameter
of 1/4 in. (5 to 7 mm)
In addition, depending on the type of modules you plan to use, you might need the following equipment
to connect a port to an external network:
Cables for connection to the WAN and LAN ports (dependent on configuration)
•
Note
Ethernet hub or PC with a network interface card for connection to an Ethernet (LAN) port.
•
Console terminal (an ASCII terminal or a PC running HyperTerminal or similar terminal emulation
•
software) configured for 9600 baud, 8 data bits, 1 stop bit, no flow control, and no parity.
Modem for connection to the auxiliary port for remote administrative access (optional).
•
Data service unit (DSU) or channel service unit/data service unit (CSU/DSU) as appropriate for
•
serial interfaces.
External CSU for any CT1/PRI modules without a built-in CSU.
•
Hardware Installation Guide for the Cisco 4000 Series Integrated Services Router
2-14
To install or remove modules
To remove the cover, if you are upgrading memory or other components
2
AWG 6 (13 mm
) wire for NEBS-compliant chassis grounding
2
AWG 14 (2 mm
) or larger wire for NEC-compliant chassis grounding
2
AWG 18 (1 mm
) or larger wire for EN/IEC 60950-compliant chassis grounding
For more information on cable specifications, see the
Specifications
document at cisco.com.
Chapter 2
Cisco 4000 Series ISRs Preinstallation
Cisco Modular Access Router Cable
OL-32185-02
Hide quick links:
Advertisement
Table of Contents
