Table of Contents
Advertisement
Installing the Cisco ASR 907 Router
Installing the Chassis Ground Connection
Figure 40: Cable Management Bracket (A907-CAB-BRACKET)
1
Cable management guide
Step 2
Secure the cable management brackets with four M4 screws. The recommended maximum torque is 10 in.-lb
(1.12 N-m).
Installing the Chassis Ground Connection
Before you connect the power or turn on the power to the Cisco ASR 907 Router, you must provide an adequate
chassis ground (earth) connection to your router.
This section describes how to ground the Cisco ASR 907 Router chassis. The router provides two locations
for attaching a 2-hole grounding lug according to the rack-mounting brackets you use to install the router.
Cisco ASR 907 Router Hardware Installation Guide
66
Advertisement
Table of Contents
