Starting A New Exam On An Existing Patient; Exam View - GE LOGIQ V2 User Manual
Hide thumbs
Also See for LOGIQ V2:
- Technical publication (127 pages) ,
- Basic service manual (317 pages)
Table of Contents
Advertisement
Starting a new exam on an existing patient
LOGIQ V2/LOGIQ V1
Direction 5610736-100 Rev. 9
For R1.0.x software:
1. Select Archive on the control panel.
2. Select the patient from the Patient List.
3. Select Scan to enter into scanning, perform the exam.
If the patient information needs to change while scanning,
select Patient.
4. Select Preset on the control panel to select the probe and
application.
If the probe and preset needs to change while scanning,
select Preset again.
5. Press the Store key to store the static image or cineloop
saved in the exam to the clipboard.
6. When you have completed the study, select End Exam on
the control panel or Primary Menu to end current patient.
The system permanently stores all images of the current
patient automatically.
Select New Exam to start a new exam on the selected
patient.
A new folder is automatically created on that patient.
For R1.1.x software:
1. Select Patient on the control panel.
2. Select the patient from the Patient List.
3. Select New Exam.
4. A new exam is created. Enter the data and begin the scan.
–
User Guide
Figure 1-47. Exam View
Beginning an Exam
1-69
Advertisement
Table of Contents
