Table of Contents
Advertisement
Welcome
Thank you for choosing the Cisco CVR328W Wireless-N 3G VPN Router.
The CVR328W provides routing, switching, security, wireless, 3G, Virtual
Private Network (VPN), quality of service (QoS), and flow control
capabilities for small businesses.
This guide describes how to physically install your CVR328W and launch
web-based Configuration Utility to configure and manage your CVR328W.
Before You Begin
1
Installation Requirements
Before you begin the installation, make sure that you have the following:
• An active Internet account.
• RJ-45 Ethernet cables (Category 5E or higher) for connecting
computers, WAN and LAN interfaces, or other devices.
• PC with Microsoft Internet Explorer 6.0 (or higher) or Mozilla Firefox 3.0
(or higher) for using web-based Configuration Utility.
• (Optional) Tools for attaching the CVR328W to the wall. Instructions are
provided for wall-mounting, but the wall-mounting hardware is
user-supplied.
Default Settings
These are the default settings used when configuring your CVR328W for
the first time:
Parameter
Username
Password
LAN IP
DHCP Range
Press and hold the RESET button for more than 5 seconds with a
N
OTE
paper clip or a pencil clip to reboot the unit and restore the factory
defaults. Changes that you have previously made to the CVR328W
settings are lost.
12
Default Value
cisco
cisco
192.168.1.1
192.168.1.100 to
192.168.1.200
Cisco CVR328W Wireless-N 3G VPN Router Quick Start Guide
Advertisement
Table of Contents
