Table of Contents
Advertisement
• Mechanical Loading—Be sure that the CVR328W is level and stable to
avoid any hazardous conditions.
Place the CVR328W horizontally on a flat surface so that it sits on its four
rubber feet.
Wall Mounting
The CVR328W can be wall-mounted. The wall-mounting hardware is
user-supplied. The ports on the back panel must face either upward or
downward when mounting the unit to the wall. The recommended
dimensions for the mount kit are as follows:
2
1 8 mm/0.31 in
Insecure mounting might damage the device or cause injury.
W
ARNING
Cisco is not responsible for damages incurred by insecure
wall-mounting.
To mount the CVR328W to the wall:
Determine where you want to mount the CVR328W. Verify that the
S
1
TEP
surface is smooth, flat, dry, and sturdy.
Drill two pilot holes into the surface 5.9 inches (150 mm) apart.
S
2
TEP
Insert a screw into each hole, leaving a gap between the surface
S
3
TEP
and the base of the screw head of at least 0.1 inches (3 mm).
Place the CVR328W wall-mount slots over the screws and slide
S
4
TEP
the CVR328W down until the screws fit snugly into the wall-mount
slots.
16
1
3
2 25 mm/0.98 in 3 6.5 mm/0.26 in 4 17.9 mm/0.7 in
Cisco CVR328W Wireless-N 3G VPN Router Quick Start Guide
4
Advertisement
Table of Contents
