Side Slip Tester Sdl 410 - Bosch BSA 43 Series Original Instructions Manual

Test lane with pc for passenger vehicles

Hide thumbs Also See for BSA 43 Series:

Table of Contents

Available languages

64 | BSA 43xx | Automatic mode

4. Drive vehicle out of suspension tester.

Side slip tester SDL 410

1. Check prerequisites:

No vehicle on dynamometer!

Tester/test routine selected.

"Automatic" mode selected.

2. Keeping the vehicle straight, drive both axles at

a constant speed over the side slip tester. Speed

max. 15 km/h.

1 691 606 210

Result / Display

 Peak value display (approx. 5 seconds):

Road surface adhesion on left and right side (↓).

Difference in road surface adhesion (Δ)

Resonant frequency on left and right side (f)

Difference in resonant frequency (Δf)

Chassis measurement is over.

Result / Display

 Left: "Side slip tester" device symbol.

 Right: Drive-on prompt.

 Ready for toe measurement.

 Front axle toe is measured.

 Peak value display (approx. 5 seconds):

 Toe misalignment (<-->).

Toe measurement is over.

Robert Bosch GmbH

Table of Contents