Fitting Method - Mitsubishi Electric MELSERVO-J5 User Manual

Ac servo system

Hide thumbs Also See for MELSERVO-J5:

Table of Contents

Fitting method

Install the attachment onto the servo amplifier before installing the servo amplifier into the cabinet.

*1 Use one of the flat head screws included with the attachment. (Tightening torque: 1.2 [N•m])

Installation precautions

Ensure that the attachment is installed perfectly straight so that it does not protrude beyond the side of the module.

If the attachment is not straight, the hole in the bracket may not alight with the screw hole.

The attachment may come loose if it is installed at an angle and then forcibly moved into position. Loosen the screw before

adjusting the position of the attachment.

Cabinet-mounting attachment

Install the cabinet-mounting attachment perfectly straight so that

it does not protrude beyond the side of the module.

6 OPTIONS AND PERIPHERAL EQUIPMENT

6.18 J5-CHP07-10P cabinet-mounting attachment