Table of Contents
Advertisement
Description
3.5 Three-phase devices 5 A
3.5.4
Parameterization
3.5.4.1
Set parameters (setup)
Selecting a menu
1. In the standard measurement display, simultaneously press the "Increase" and "Decrease"
keys to call the main menu.
2. Select SET and press the "Next" key to open the settings menu.
The display shows the first menu level P01 on the top left with selection 01 flashing.
3. Use the "Increase" or "Decrease" keys to select the required menu (e.g. P01, P02, P03).
During the selection, the alphanumeric display shows a brief description of the currently
selected menu.
Simultaneously press the "Increase" and "Decrease" keys to exit the setting and return to
the measurement display.
Note
The following table lists the available menus, which vary depending on the device
versions. Not all codes are available with all devices.
1)
2)
48
Code
Menu
P01
GENERAL
P02
OTHER
P03
PASSWORD
P04
INTEGRATION
P05
HOUR COUNTER
P07
COMMUNICATION
P08
LIMIT THRESHOLDS
P09
ALARMS
P11
ENERGY PULSES
P13
INPUTS
P14
OUTPUTS
2)
On M-BUS and RS 485 devices only
On S0 devices only
Description
Specification of the system
Language, brightness, display, etc.
Password activation
Integration times
Hour counter settings
Communication settings
1)
Limit values
Alarm messages
Configuration of energy pulses (S0)
2)
Programmable inputs
Programmable outputs
7KT16 energy meter
Equipment Manual, 09/2020, 2514284147-04
Hide quick links:
Advertisement
Table of Contents
