3. Open the locking tab on the front of the Operator
Presence Control (OPC) switch. Unplug the harness
from the OPC (Fig. 0549).
Fig 0549
4. Depress the connector lock with a small fl at screw-
driver (Fig. 0550).
Fig 0550
Floating Deck Mid-Size Service Manual
5. While holding the lock down, draw the wire and
spade terminal out of the connector (Fig. 0551).
PICT-1670a
6. Repeat steps 2 and 3 to remove the second terminal
from the switch.
7. Pull the wire harness from the center tube in the
T-bar (Fig. 0552).
PICT-1689
LINKAGE
Fig 0551
PICT-1692
Fig 0552
PICT-1694a
4
4-67