SECTION 3 - REPAIR INFORMATION
REPAIRING THE TV
If the latest Software does not correct the issue, complete the following:
1. Verify the television has the symptom the customer indicated.
2. Replace part causing the error.
3. Install the latest version of Software (Required for ALL repairs).
4. Perform the required service adjustments and checks.
5. Verify the repair resolved the issue.
REMOVING THE TABLE-TOP STAND
AND COVER UNDER
1. Place TV face down on a soft and flat surface.
2. Grasp Cover Under as shown, then carefully pull upwards to release the
locking clips and lift to detach.
3. Remove 4 screws from Table-Top Stand and pull down as shown to
detach from Rear Cover.
XBR-65X900A
REMOVING THE REAR COVER
1. Remove 1 screw from AC Cover and disconnect the AC Power Cord.
HOLD
2. Remove 5 Screw Caps from the top of the Rear Cover.
3. Locate and remove all screws from the Rear Cover.
4. Grasp Rear Cover as shown and lift to detach.
14