hit counter script

Honeywell COMFORTTEMP 4 HCE640 Series Manual page 2

Table of Contents

Advertisement

Available languages

Available languages

12. Warning – It is normal for the plug to feel warm
to the touch; however, a loose fit between the
AC outlet (receptacle) and plug may cause
overheating and distortion of the plug. Contact a
qualified electrician to replace loose or worn outlet.
13. Warning – To disconnect the heater, first turn off
the product, then grip the plug body and pull it
from the wall outlet. DO NOT pull by the cord.
14. Warning – DO NOT insert or allow foreign objects
to enter any ventilation or exhaust opening as
this may cause electric shock, fire, or damage
to the heater.
15. Warning – To prevent a possible fire, DO NOT
block air intakes or exhaust in any manner.
DO NOT use on soft surfaces, like a bed, or where
openings may become blocked.
16. Warning – A heater has hot and arcing or
sparking parts inside. DO NOT use it in areas
where gasoline, paint or flammable liquids are
used or stored.
17. Warning – Use this heater only as described in this
manual. Any other use not recommended by the
manufacturer may cause fire, electric shock, or
injury to persons.
18. Warning – ALWAYS plug heater directly into
a wall outlet/receptacle. DO NOT use with an
extension cord or relocatable power tap
(outlet/power strip).
19. Warning – NEVER tamper with this product
or attempt to fix it. Any tampering with, or
modification of this product can result in serious
injury, death, or fire. DO NOT open. Risk of electric
shock. There are no user serviceable parts inside.
ABOUT CERAMIC TECHNOLOGY
• Ceramic heaters generate heat by passing electricity through heating elements embedded in ceramic plates.
• In the Honeywell ComfortTemp™ 4 Ceramic Heater, air is drawn into the back of the heater by a fan, and then
pushed through the ceramic element and out the front of the heater to gently introduce warm air into the room.
• This type of heating technology provides consistent, even heating.
• For best heat output, place heater on the floor and allow it to run for 5-10 minutes.
20. Warning – DO NOT remove product labels
that contain warnings or safety instruction.
21. Caution – The output of this heater may vary
and its temperature may become intense enough
to burn exposed skin. Use of this heater is not
recommended for persons with reduced sensitivity
to heat or an inability to react to avoid burns.
22. Caution – Before cleaning, or storage, or when
not in use, turn the product's controls to the OFF
position and unplug the heater from the electrical
outlet and allow to cool.
23. Caution – Place the heater on a firm, level, open
surface free from obstructions and at least 3 feet
(0.9 m) away from any combustible materials.
DO NOT use on an unstable surface such as
bedding or deep carpeting. Be sure the heater
is not in a position where it may be tripped over
by small children or pets.
24. Caution – If your home has aluminum wiring
have a licensed electrician check your receptacle's
connections. When using a 1500 watt heater,
aluminum wire connections can cause a safety issue.
SAVE THESE
25.
INSTRUCTIONS
2

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Comforttemp 4 hce643 seriesComforttemp 4 hce645 series

Table of Contents