4 SET-UP AND PROCEDURE BEFORE OPERATION
4.2 Set-up and Procedure before Operation
4
4 - 2
The following provides pre-operation procedure.
(1) Accessing the host CPU from the Web server module
Web server module
IP address
[192. 168. 3. 3]
Subnet mask [255. 255. 255. 0]
Procedures before operation
Mount a battery to the Web server module.
Mount a Web server module onto the base unit.
Make one-to-one connection between the Web server
module and personal computer with a crossing cable
to make the network setting.
Set various functions from the Administrative menu.
Tag setting
Logging setting
Event setting
Click on "Update" button on the "Setting update"
screen, or power the programmable controller OFF
and ON or reset the CPU module, to update the
settings on the Web server module.
Monitor each operation on the monitor screen to
confirm the setting.
POINT
The Web server module stores in the standard ROM the setting information,
logging data, user HTML, etc. set in the Administrative menu.
It is recommended to back up the standard ROM data (setting information, logging
data, user HTML, etc.) into the CompactFlash card periodically. (Refer to Section
6.10)
personal computer
crossing cable
IP address
[192. 168. 3.
]
Subnet mask [255. 255. 255. 0]
Operation
MELSEC-Q
Refer to Section 4. 10. 2.
Refer to Section 4. 5.
Refer to Chapter 6.
Refer to Section 4. 6. 2.
Refer to Section 6.2.
4 - 2