hit counter script

Mitsubishi Electric MELSEC Q Series User Manual page 128

Programmabale web server module
Hide thumbs Also See for MELSEC Q Series:
Table of Contents

Advertisement

4 SET-UP AND PROCEDURE BEFORE OPERATION
Web server module
Procedures before operation
Confirm that the Web server module can access the
host station CPU and/or other station CPU.
A contract with the Internet service provider is required
prior to the Internet connection.
Create a proper environment for the external device
Personal computer so that Internet connection is
available.
Make one-to-one connection between the Web server
module and personal computer with a crossing cable
to make the network setting.
Make network setting for the Web server module on
the following screen from the Administrative menu.
System setting
Dial-up setting
FTP setting
E-mail setting
Address notification setting
Account setting
IP filter setting
Power off the programmable controller and disconnect
the crossing cable from the Web server module.
Connect the Web server module to the LAN, modem,
etc.
4 - 4
(3) Connecting the Web server module to the network
personal computer
crossing cable
MELSECNET/H, etc.
1)
Refer to Section 4. 2. (1). (2).
Refer to Section 4. 5.
System setting
: Refer to Section 4. 6. 3.
Dial-up setting
: Refer to Section 4. 6. 4.
FTP setting
: Refer to Section 6. 7. 3.
E-mail setting
: Refer to Section 6. 6. 3.
Address notification setting : Refer to Section 6. 9. 2.
Account setting
: Refer to Section 4. 6. 5.
IP filter setting
: Refer to Section 4. 6. 6.
Refer to Section 4.4.
MELSEC-Q
4 - 4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Melsec qj71ws96

Table of Contents